product background

Textile fabrics test

  • Textiles fabrics light-absorbing thermal properties test

    Textiles fabrics light-absorbing thermal properties test

    TXT-XG001 Textiles fabrics light-absorbing thermal properties test it is used to test the performance of textiles to convert, absorb and store light energy and heat energy under light conditions, so that the internal energy of the material is accumulated and the temperature rises.     1. Working principle:   Place the sample and the control sample under a light source of specified power to irradiate, use a temperature sensor to measure the surface temperature of the specified part on the sam...
  • Textile fabric water resistance rain  test by impact with heat and cool

    Textile fabric water resistance rain test by impact with heat and cool

    Application The rain performance tester is used to measure the resistance to water by impact of any textile fabric that has passed or is not waterproof or water repellent.  Principle Behind the sample put a weighing absorbent paper, under certain conditions, the water spray sample 5min. And then by re-weighing the absorbent paper, you can determine the water volume of samples infiltration durning the test Relevant standards The tester according to AATCC_35_2000, AATCC_35_2013 waterproof, ra...
  • Textile far infrared performance test

    Textile far infrared performance test

    Infrared heating tester adopts far-infrared emissivity and temperature rise test to measure the far-infrared performance of textiles, and gives far-infrared performance evaluation. Suitable for all kinds of textile products, including materials such as fibers, yarns, fabrics, non-woven fabrics and their products. Does not involve medical product testing. 1. Working principle: Place the standard blackbody plate and the sample on the hot plate one after the other, adjust the temperature of the ...
  • Textile Fabric Electrostatic Decay Test

    Textile Fabric Electrostatic Decay Test

    Scope of application: This instrument is used to test the ability of medical protective clothing materials and non-woven fabrics to eliminate the electric charge induced on the surface of the material when it is grounded when the voltage is ±5000V, that is, to determine the attenuation from the peak voltage to 10% Static decay time. [Method standard]: National standard: GB19082-2009 “Technical requirements for medical disposable protective clothing” GB/T33728-2017 Textiles Evaluat...
  • Masks Water Vapor Transmission Test

    Masks Water Vapor Transmission Test

    Scope of application: Used for moisture permeability test of various fabrics and coated fabrics. [Method standard]: GB/T12704 ASTM E96 JISL1099, etc.   【technical parameter】: 1. Adjustable temperature range: 20~50℃; 2. Control accuracy: ±0.1℃; 3. Adjustable humidity range: 40~95%RH; 4. Relative humidity: ±0.1%RH; 5. Standard test temperature and humidity: 38℃±0.5℃ 90±2%RH; 23℃±0.5℃ 50±2%RH; 20℃±0.5℃ 65±2%RH; 38℃±0.5℃ 50±2%RH; 6. Air velocity in the box: 7. Size and number of breathable cu...